"UNIK" Gauges are made out of Tungsten based Oil-Hardened Non Shrinking Steel (OHNS) duly tested for uniform microstructure and hardness.
Our Gauges are manufactured on imported Grinding machines by highly skilled personnel and undergo thorough inspection in our fully equipped temperature
controlled standards room.
Thread Plug Gauges : Parallel and Taper
Range :- 2 to 200 mm Dia. for Parallel Threads
1:16 Taper & Dia. 1/8 inch to 8 inch for Taper Threads.
We make TPG as per IS, BS, DIN and American Standards.
Plain Plug Gauges : Parallel & Taper
Range
Type
Specification
0.5 to 12 mm
Reversible
Mfg. Tolerance for PPG
IS : 7859-1975 & IS : 919-1963
05 to 40 mm
Taperlock
Blank Design : as per
IS : 6244 - 1980
40 to 120 mm
DISC (Tri-lock) Design
Our own design
120 to 300 mm
Plate Type
IS - 2251 : 1986
MT - 1 to MT - 5 Taper Plug Gauge
Taper Lock
IS - 2251 : 1986
ISO-30 TO ISO 50 Taper Plug Gauge
Taper Lock
IS 9475 : 1986
Thread and Plain Ring Gauges
Thread Ring Gauges : Parallel and Taper Range : 3 to 150 mm Dia.
Taper : 1:16
Specification : As per IS, BS, DIN and American Stds.
MSR and Plain Ring Gauges Range : 0.5 to 200 mm
Specificaition : IS : 3485 & IS : 3455 - 1985
Taper Ring Gauges MT-1 to MT-5
ISO - 30 to ISO - 50
Snap Gauges and Measuring Pins
Snap Gauges :
Nominal Range - Upto 160 mm, single ended progressive type plate snap gauges as per IS : 1991
Above 160 mm our standard design.
Double ended snap gauges as per IS : 4583-1968
Manufacturing tolerance as per IS : 3455-1971, IS : 919-1963.
Measuring Pins : Steel and Carbide
Nominal Range - 0.5 to 12 mm in step of 0.01, 0.02, 0.05 mm as per requirement.
Pin sets available ex-stock in wooden box. We also offer loose measuring pins as per customer's
requirements.
Non - Standard Gauges : Our Speciality
We manufacture special gauges as per customer's requirements such as Thread depth, concentricity, Squareness, Flush pin, Position gauges etc.
We also design & manufacture gauges as per requirement of customer's components.
